Saturday 11 June 2016

YAPTON MOSAIC - CASTING TECHNIQUE

AS THE FINAL SECTION COMES OFF THE BENCH I THOUGHT IT MIGHT BE INTERESTING TO SHOW THE CASTING TECHNIQUE.

First photo shows the completed panel on the bench, in reverse.  It was made by following a reversed drawing on polythene and attaching the mosaic with Spraymount.  Then, using bendy MDF, 50mm walls are made around the mosaic to contain the concrete backing.  The walls are held in place with wooden noggins screwed onto the bench and the inner walls are lined with waterproof tape.

First the "goo", a mix of neat Portland cement between all the joints and across the back of the tesserae.  Then a layer of the concrete mix (sharp sand, fine aggregate and cement) then a fibre membrane levelled-off with more cement.  Covered for three days, then taken out of the mould, flipped over and cleaned.  All ready to go!







Friday 3 June 2016

YAPTON MOSAIC NEARS COMPLETION

OLIVER WORKING ON THE FINAL PANELS OF THE YAPTON MOSAIC



FORD AIRFIELD PANEL ON THE BENCH (IN REVERSE)


WORKING IN REVERSE WITH PORCELAIN TILES IS INTERESTING AS YOU CANNOT SEE THE COLOUR OF THE FACE OF THE TILE ONCE YOU'VE SET IT DOWN! 


NAVIGATORS PANEL COMPLETED


FORD AIRFIELD WW1 AVIATOR PANEL COMPLETED 


"1920/30s "FLAPPER" PANEL ON BENCH (IN REVERSE) READY FOR CASTING